Jamblender Pad by Jam

Oscillator 1 timbre

Only square oscillators are enabled, resulting in a narrow sounding tone.

Pulse width of square oscillator is set to 66% (50% is perfectly square, 100% is very short pulsewave) and is modulated by Note Vel, LFO 2, VCF Env.

LFO 2 direct modulation amount for pulse width of square oscillator is 80.

Oscillator 2 timbre

Volume level for oscillator 2 is set to 0 and is modulated by Mod Env.

Mod Env mod-matrix 1 modulation amount for volume level for oscillator 2 is 48.

Tone for oscillator 2 is set to 50 and is modulated by Note Vel, VCF Env.

Note Vel modulates VCF Env (amount: 72), that in turn modulates tone for oscillator 2.

VCF Env mod-matrix 3 modulation amount for tone for oscillator 2 is 72.

Volume (VCA) volume

Amplification level is set to 5.93dB (254) and is modulated by VCA Env.

VCA Env direct modulation amount for amplification level is 254.

Pan spread is manually set to 81.

Oscillators ranges timbre

Oscillators 1 range is 4'.

Oscillators 2 range is 4'.

Noise timbre

Noise level is manually set to 67.

Low-pass filter (VCF) timbre

Low-pass filter cut-off frequency is set to 125.01Hz (39) and is modulated by Pressure, Note Vel, VCF Env.

Pressure mod-matrix 4 modulation amount for low-pass filter cut-off frequency is 76.

VCF Env direct modulation amount for low-pass filter cut-off frequency is 127.

Low-pass filter envelope amount is modulated by Note Vel, Note Num, VCF Env.

Note Vel direct modulation amount for low-pass filter envelope amount is 113. Note Vel modulates VCF Env (amount: -31), that in turn modulates low-pass filter envelope amount.

Note Num direct modulation amount for low-pass filter envelope amount is 191.

VCF Env mod-matrix 2 modulation amount for low-pass filter envelope amount is -31.

Filter has no resonance.

Oscillator drift & unison detuning timbre

Unison detune level is manually set to ±13 cents (67).

Oscillators drift level is manually set to 27. Drift rate is 0

Oscillator 1 pitch pitch

Oscillator 1 pitch is modulated by LFO 1.

LFO 1 direct modulation amount for oscillator 1 pitch is 7.

FX routing & levels fx

FX mode is set to Send, and routing is

Effect 1 level is manually set to 102. Effect 2 level is manually set to 105. Effect 3 level is manually set to 110. Effect 4 level is manually set to 150.

Multi-Band Distortion fx

not yet complete

Noise Gate fx

not yet complete

Chorus D fx

not yet complete

Ambient Reverb fx

not yet complete


Mod Wheel modulator

Controls OSC 1 Mod Wheel > Pitch Mod Depth.

functiontypedestinationamount
pitch menu OSC 1 Mod Wheel > Pitch Mod Depth 5

Pressure modulator

Controls VCF Cut-off Frequency.

functiontypedestinationamount
timbre matrix VCF Cut-off Frequency 76

Note Num modulator

Controls VCF Keyboard Tracking.

functiontypedestinationamount
timbre fader VCF Keyboard Tracking 191

Note Vel modulator

Controls VCF Cut-off Frequency, VCF LFO, OSC 1 Pulse Width Modulation Depth, OSC 2 Tone Modulation Depth, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.

functiontypedestinationamount
timbre fader-indirect VCF Cut-off Frequency 127
timbre indirect VCF LFO -31
timbre fader-indirect OSC 1 Pulse Width Modulation Depth 80
timbre indirect OSC 2 Tone Modulation Depth 72
menu VCF Envelope Velocity Sensitivity 113
menu VCA Envelope Velocity Sensitivity 55

LFO 1 modulator

Controls OSC 1 Pitch.

functiontypedestinationamount
pitch fader OSC 1 Pitch 7
namevalue
LFO 1 Rate 3.73Hz (156)
LFO 1 Delay / Fade 1.11s (43)
LFO 1 Shape Square
LFO 1 Key Sync off
LFO 1 Arp Sync off
LFO 1 Mono Mode 0
LFO 1 Slew Rate 1

LFO 2 modulator

Controls OSC 1 Pulse Width Modulation Depth.

functiontypedestinationamount
timbre fader OSC 1 Pulse Width Modulation Depth 80
namevalue
LFO 2 Rate 3.05Hz (149)
LFO 2 Delay / Fade 0s (0)
LFO 2 Shape Sine
LFO 2 Key Sync off
LFO 2 Arp Sync off
LFO 2 Mono Mode 0
LFO 2 Slew Rate 0

VCA Env modulator

Controls VCA Gain for All Voices.

functiontypedestinationamount
volume menu VCA Gain for All Voices 254
namevalue
VCA Envelope Attack Time 12.43s (200)
VCA Envelope Decay Time 8.51s (189)
VCA Envelope Sustain Level 99% (254)
VCA Envelope Release Time 15.99s (210)
VCA Envelope Trigger Mode Key (0)
VCA Envelope Attack Curve 38
VCA Envelope Decay Curve 0
VCA Envelope Sustain Curve 127
VCA Envelope Attack Curve 163

VCF Env modulator

Controls VCF Cut-off Frequency, VCF LFO, OSC 1 Pulse Width Modulation Depth, OSC 2 Tone Modulation Depth.

functiontypedestinationamount
timbre fader VCF Cut-off Frequency 127
timbre matrix VCF LFO -31
timbre fader-indirect OSC 1 Pulse Width Modulation Depth 80
timbre matrix OSC 2 Tone Modulation Depth 72
namevalue
VCF Envelope Attack Time 0.38s (65)
VCF Envelope Decay Time 14.21s (205)
VCF Envelope Sustain Level 11% (27)
VCF Envelope Release Time 8.51s (189)
VCF Envelope Trigger Mode Key (0)
VCF Envelope Attack Curve 110
VCF Envelope Decay Curve 0
VCF Envelope Sustain Curve 127
VCF Envelope Attack Curve 0

Mod Env modulator

Controls OSC 2 Level.

functiontypedestinationamount
timbre matrix OSC 2 Level 48
namevalue
Mod Envelope Attack Time 0.46s (78)
Mod Envelope Decay Time 1.37s (144)
Mod Envelope Sustain Level 50% (127)
Mod Envelope Release Time 6.38s (183)
Mod Envelope Trigger Mode Key (0)
Mod Envelope Attack Curve 107
Mod Envelope Decay Curve 0
Mod Envelope Sustain Curve 127
Mod Envelope Attack Curve 52